Press "Enter" to skip to content

How to reconnect your AirPods to your Windows 10 PC

There are many users who place their trust in all those peripherals that do not require a cable to connect with another. They are the marvels of technology, allowing data to be sent via signals and also eliminating cables. But these have their bad part and that is that sometimes they disconnect from their devices either due to lack of power or due to a connection problem. If the first is not the case, we will tell you how you can reconnect your AirPods to your Windows 10 computer.

Yes, your AirPods also work in Windows 10

Popular belief invites you to think that when you have an Apple device you also have to buy its accessories. In a way, it is correct if we see it from the point of view of taking advantage of all the functions, but sometimes the important thing is to take advantage of most of its features. so yes it is possible to connect your AirPods to your PC although, as it can also happen in an appliance of the bitten apple, it can give some error.

How to fix errors between AirPods and Windows 10

At this point, we can only talk about the solutions for this very conventional problem. And for conventional we have to take a look at all those obvious things but you haven’t had when connecting your AirPods to Windows 10. The first and most important is check the power of the headphones, so if they do not have a load they do not work. The other point you should check is if you turned on the Bluetooth of your computer, which is key for communication between both devices.

It may be that another device is connected to the Apple headphones, in which case you have two options: the first is to deactivate the Bluetooth of the second device and the second is to unpair the AirPods from this. They are different things, since the first one completely turns off the connection with other devices and the second only selects the device that you must unlink while maintaining the connection with the rest.

If we go to your computer you will have to follow some similar steps. The first one is to unpair and re-pair the headphones. It is as simple as going to Settings> Devices> Audio and unpair AirPods. Then go to the section to add Bluetooth or another device and pair them again. You can also turn to the Windows troubleshooter to find and fix all the bugs related to connections of this type and get your AirPods to work in Windows 10.

.

Article Source

Disclaimer: This article is generated from the feed and not edited by our team.